800.851.0436

Open Flange Super Grouter

R3-OF Grout Pump
R3-OF Grout Pump

MAXIMUM EFFICIENCY AT AN AFFORDABLE PRICE

The Open Flange Super Grouter Grout Pump is the workhouse of our Group Pump Line. It allows you to mix and pump high volumes of neats cement, pre-blended grout mixes or sanded grouts.

With two 55-gallon mixing tanks and a 30-gallon auger fed pump hopper feeding directly into a progressive cavity pump, you can continuously mix and pump some of the toughest products under pressures up to 300 psi.

Using large 3" dump valves on the mix tanks allows for easy flow of heavy viscous grouting materials.

Incorporating a two-speed mix, forward and reverse, in conjunction with a colloidal style mix is the most efficient and fastest way to mix your products.

The control panel is conveniently located for ease of operating both mix tanks and the pump hopper at the same time.

The Open Flange Super Grouter Grout Pump can be purchased skid mounted or on a trailer.

STANDARD EQUIPMENT

  • Pressure Gauge
  • Discharge Hose
  • Quick Couplers
  • 13 Horse Power Honda Engine
  • 0-300 PSI Discharge Pressure
  • Up to 20 GPM Discharge
  • Height: 54"; Width: 40", Length: 95"
  • High- and Low-Speed Mix
  • Weight: 1,300 lbs.
  • Introduce Waste Water with Pump

ELECTRIC MOTOR ALSO AVAILABLE

Grout Pump Electric Motor

  • 15 Horse Power Electric Motor
  • 230 Volt/3-phase
  • 60 Hertz
  • 30 Amp

LIFETIME WARRANTY Limited.

SPECIFICATIONS

DIMENSIONS H = 54" W = 40" L = 95" Weight = 1,300 lbs.

ENGINE* Honda 13 HP * Electric motor also available

HOPPERS Two 52-gal. Mixing 30-gal. auger-fed pump

DISCHARGE PRESSURE 0-300 psi

These engineering specifications are computed on a theoretical basis.
Actual capacities will vary according to specific operating conditions.
R-2 Mfg., Inc.reserves the right to change specifications without notification or obligation.

 

:::

 

Web Design for Vancouver, WA