Grout King Logo wh

 

 

800.851.0436

GROUT KING™ Grout Pump

Patent Pending

GROUT KING™SIMPLICITY There are only two levers required to operate the GROUT KING™ grout pump. The Mix Lever and Pump Lever. No other adjustments required.

ONE MAN OPERATION One person using our GROUT KING™ can mix and pump approximately 30 bags of cement, or 15 - 20 bags of Bentonite per hour. These quantities can be increased greatly by incorporating a larger progressive cavity pump on the GROUT KING™.

PUMPING CAPABILITIES The GROUT KING™ grout pump can mix and pump 250-400 Gallons of product per hour, depending on the product that is being pumped.

RECIRCULATING SYSTEM This recirculating system will allow the operator to keep a shearing action on the product while waiting. If for any reason the operator is detained during the pump cycle, he can quick couple the discharge hose into the side of the hopper and re-circulate back into the mixer, and pump, thereby retarding dehydration.

65 GALLON HOPPER The GROUT KING™ hopper is designed with a cone shaped, funnel bottom mounted directly over the intake of the Progressive Cavity Pump so that everything that goes in the hopper, goes in the pump. No flat bottom for product to dry in the corners.

All features on the GROUT KING™ are standard equipment. The Pressure Gauge, Discharge Hose, Quick Coupler, 13 HP Honda Engine, 2 - Speed Mixer. Progressive Cavity Pump.

STANDARD FEATURES

FORWARD AND REVERSE PRESSURE FLUSH CAPABILITY For clean-up, the pump can run in forward or reverse. Utilizing the forward and reverse pressure flush assures the operator that his pump, which is the heart of his machine, is completely cleaned.

DISCHARGE PRESSURE The GROUT KING™ can reach pressures up to 300 psi on non-continuous duty cycle. 150-250 psi is recommended on a continuous duty cycle.

SPECIFICATIONS

DIMENSIONS
H = 47"
W = 37"
L = 56"
Weight = 650 lbs.

ENGINE*
Honda 13 HP
Fuel Tank Capacity - 1 ½ gal.

HOPPER
65 gal. Mixing

HYDRAULIC SYSTEM
750 - 875 psi
Hydraulic Reservoir - 15 gal.
Filtration - 10 micron, spin-on element

DISCHARGE PUMP
Progressive Cavity (2L4 CDQ)

These engineering specifications are computed on a theoretical basis.
Actual capacities will vary according to specific operating conditions.
R-2 Mfg., Inc.reserves the right to change specifications without notification or obligation.

 

 

Web Design for Vancouver, WA